Monday, September 10, 2012

The Painting Peg Boards

Twenty dollars and an hour of work result in a pretty nice painting tool. Boards equipped with removable pegs for painting individual models.

3 - 1" diameter 4' long dowel rod
1 - 2" x 6" x 10' board (inexpensive $6)

1. Cut the dowel rod down to 6" lengths.

2. Drill 1" holes for desired spacing between rods. I recommend staggering them to take advantage of width of the boards.

3. The two in the pictures are going to be used for priming but I will be making a larger one with smaller spacing tomorrow.

No comments:

Post a Comment